Press brake with automatic tool changer
Speeds
| Operation | Value | Unit | Note | Open |
|---|---|---|---|---|
Bend | 12 | s per bend per part | After Setup |
Rules
| ID | Type | Rule | Value | Unit | Open |
|---|---|---|---|---|---|
R4 | Routing | If the annual volume of a sheet part is ABOVE the Value, recommend the stamping route (M3 with a progressive die, see sheet Tooling) instead of laser plus press brake. Use the annual volume stated on the drawing, not the order quantity. | 5000 | pcs per year | |
R11 | Routing | When R4 applies: quote the stamping route as the recommended option AND show the laser plus press brake route as an alternative for comparison, with the break-even volume. |
Tooling
| Die ID | Applies to | Die cost EUR | Lead time (weeks) | Note | Open |
|---|---|---|---|---|---|
