Zinc plating line

Zinc plating price

0.15

EUR per part

Up to 100 cm2 surface; machine hourly rate NOT applied to run time; setup applies and is charged once per batch at the machine hourly rate (setup_min/60 x rate), see R20. Surface area convention: see R24.

Zinc plating price (100-200 cm2)

0.3

EUR per part

>100 up to 200 cm2 surface; machine hourly rate NOT applied to run time; setup applies and is charged once per batch at the machine hourly rate (setup_min/60 x rate), see R20. Surface area convention: see R24.

Zinc plating price (200-400 cm2)

0.55

EUR per part

>200 up to 400 cm2 surface; machine hourly rate NOT applied to run time; setup applies and is charged once per batch at the machine hourly rate (setup_min/60 x rate), see R20. Surface area convention: see R24.

R3

Technical

Quantity under the Value: zinc plating and heat treatment batch minimum applies, charge as the Value.

200

pcs (batch minimum)

R20

Calculation

Zinc plating setup: the setup time of M8 is always charged once per batch at the M8 hourly rate (setup_min / 60 x rate). The hourly rate is NOT applied to plating run time; the run charge is the EUR per part price of the matching surface-area band in Speeds.

R24

Calculation

Plating surface area per part, used to pick the price band: both faces of the flat blank minus the area of all holes (2 x net area), plus the edge area (outer perimeter plus all hole perimeters, times thickness). Bend radii are ignored. Area in cm2.